Report item
Item specifics
  • Interface Type: HDMI
  • Feature: USB Port,Touch Screen
  • Brand Name: Waveshare
  • Model Number: 5inch HDMI LCD
  • Application: Laptop
  • Panel Type: IPS
  • Products Status: Stock
  • Screen Size: 5''
  • Used for: All models of Raspberry pi
  • Touch Screen Type: Resistive
  • Resolution: 800*480
  • Dimension: 121mm* 78mm
  • Touch Panel Interface: I/O
Product Description

5pcs/lot Raspberry Pi LCD Display 5inch TFT Resistive Touch Screen HDMI Interface for All Rev of Rapsberry pi(Pi 3)A/A+/B/B+/2 B

5 inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi

Features

  • 800×480 high resolution, touch control
  • Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
  • Drivers provided (works with your own Raspbian/Ubuntu directly)
  • HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
  • Back light control to lower power consumption
  • High quality immersion gold surface plating

Photos

Interface

PIN NO. SYMBOL DESCRIPTION
1, 17 3.3V Power positive (3.3V power input)
2, 4 5V Power positive (5V power input)
3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24 NC NC
6, 9, 14, 20, 25 GND Ground
19 TP_SI SPI data input of Touch Panel
21 TP_SO SPI data output of Touch Panel
22 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching
23 TP_SCK SPI clock of Touch Panel
26 TP_CS Touch Panel chip selection, low active

External Dimension

5inch-HDMI-LCD-dimension

FAQ

Why the LCD doesn\\\'t work with my Raspbian?
To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly.
Why the LCD still doesn\\\'t work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
Which power supply should I use?
It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC\\\'s USB port might have not enough power to support the Pi and LCD.

For more info, please check the wiki page.

Anti-Piracy

Note: This product is protected by patent, anyone making copies/knock-offs SHOULD be held liable pursuant to law.

Since the first-generation Raspberry Pi released, Waveshare has been working on designing, developing, and producing various fantastic touch LCDs for the Pi. Unfortunately, there are quite a few pirated/knock-off products in the market. They\\\'re usually some poor copies of our early hardware revisions, and comes with none support service.

To avoid becoming a victim of pirated products, please pay attention to the following features when purchasing:


(Click to enlarge)

Selection Guide

Part Number Resolution LCD Interface Touch Panel Interface For use with Dimension (mm) Touch Panel Type How you feel Feature
2.8inch RPi LCD (A) 320x240 I/O I/O Pi As the Pi 3B Resistive Low cost
3.2inch RPi LCD (B) 320x240 I/O I/O Pi As the Pi 3B Resistive Low cost
3.5inch RPi LCD (A) 320x480 I/O I/O Pi As the Pi 3B Resistive Cost effective
3.5inch RPi LCD (B) 320x480 I/O I/O Pi As the Pi 3B Resistive IPS screen
4inch RPi LCD (A) 320x480 I/O I/O Pi 94 × 61 Resistive IPS screen
4inch HDMI LCD 800×480 HDMI I/O Pi 99 × 58 Resistive IPS screen
4.3inch HDMI LCD 480×272 HDMI I/O Pi 106 × 68 Resistive Cost effective
5inch HDMI LCD 800x480 HDMI I/O Pi 121 x 78 Resistive Low cost
5inch HDMI LCD (B) 800x480 HDMI USB Not only Pi 121 x 76 Resistive Supports various systems
7inch HDMI LCD 1024×600 HDMI I/O Pi 165 × 107 Resistive Low cost
7inch HDMI LCD (B) 800x480 HDMI USB Not only Pi 165 x 107 Capacitive Supports various systems
7inch HDMI LCD (C) 1024x600 HDMI USB Not only Pi 165 x 107 Capacitive IPS screen, Supports various systems
10.1inch HDMI LCD 1024×600 HDMI I/O Pi 235 × 144 Resistive Cost effective
10.1inch HDMI LCD (H) 1024x600 HDMI USB Not only Pi 257 x 162 Capacitive Supports various systems
10.1inch HDMI LCD (B) 1280x800 HDMI USB Not only Pi 274 × 187 Capacitive IPS screen, Supports various systems

Note :
Pi 3B = Raspberry Pi 3 Model B
If the LCD is intended to play videos, please choose the one with HDMI display interface for better experience.

Have a look :

PACKAGE CONTENT

  1. 5inch HDMI LCD x 1
  2. HDMI connector x 1
  3. Touch pen x 1
  4. RPi screws pack (4pcs) x 1
  5. DVD × 1
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.1kg (0.22lb.)
  • Package Size: 20cm x 18cm x 10cm (7.87in x 7.09in x 3.94in)
Shipping
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.1kg (0.22lb.)
  • Package Size: 20cm x 18cm x 10cm (7.87in x 7.09in x 3.94in)
Payment
We support the following payment methods. All payments made on AliExpress are processed by Alipay.